SlideMoor

SlideMoor solves most of the docking problems that most boaters will encounter. This simple system (almost too simple) ties your boat TIGHT to a bumper/Slide that rides on an 8' track you bolt to your piling.

The vertical movement caused by waves and tides make the self lubricating carriage move up and down with your boat as necessary but any horizontal motion or surge is not allowed since the boat is tied tight to the Slide. Since all horizontal motion is eliminated, no "wind-up" is allowed to start and therefore no damaging "punch" will harm your boat or dock.

This simplifies docking lines by eliminating ALL lines except the short lines on the SlideMoor which are all on one side of your boat. Simple. This eliminates bumpers, whips, outer tide poles. No movement when loading or unloading. Larger boats can fit in smaller slips since this motion is all but eliminated.

SlideMoor ™ Features & Description

1) Slide - 6061 - T6 Extruded aluminum for strength and high resistance to corrosion. This provides the patented basis for Slidemoor, Inc. It gives a solid base for attachment of cleats and bumper.

2) Bumper - Extruded, flexible, high-molecular polyvinyl chloride will not crack, rot or corrode. Impervious to ultraviolet rays. Manufactured for durability and strength. Designed for increased protection with increased pressure.

3) Bearing - Made of 1/8" extruded Carilon® Completely wraps the track to provide high lubricity for easy movement regardless which direction the force is coming from.

4) Cleats - 2 each. (8") Black nylon, injection molded. Strong and non-corrosive. Our New Extrusion has room for larger cleats. (If you choose)

5) Track - 6061 - T6 Extruded aluminum. 96" Length allows approximately 72" slide movement. Special track lengths to 24 feet.

6) Slide Stop Top & Bottom - Prevents slide from coming off. Top maybe replace with lock.

All fasteners are 18.8 stainless steel.

Slidemoor, Inc. reserves the right to changes specifications at any time.  

(8 ft Standard other lengths available)